Good Day Crafty Friends!
Thanks for stopping in today to check out the find.
Today's find is brought to you by Craft Attitude & it is their Printable Film recently debuted at Winter CHA 2013.
The product is an inkjet printable film that can be applied to projects of all kinds. It comes in packages of 8 sheets and retails for $16.99 USD. They offer categories of the film for wood, fabric, magnets, jewelry & other materials but the material itself is the same. They package it differently so the consumer can see its versatility.
Check out the video below:
Pretty interesting stuff right?
Imagine all you can do with this!
Have a great weekend!
Friday, March 29, 2013
Tuesday, March 26, 2013
Yes crafty friends, another Big Shot from Sizzix. They also have come out with new dies designed by the lovely Stephanie.
It's all so darling but check it out in the video below for yourself:
The machine itself is great but that Flip it Card die is simply terrific!
Love the technique she shared as well.
And the tools just keep on coming so come back next week!
Have a great day.
Monday, March 25, 2013
Hey Crafty Friends!
Yes, I am talking laundry stuff again but this time it's about fabric softener.
It's today's quick tip and I think you may just love it. I know I do.
So I am a big fan of fabric softener and to that end I decided that since I use lots of it for not only laundry but to help remove wall paper from my home (oh yes I did & yes it worked). Well, I recommended to our painter to use it to remove the wall paper. So in actuality he removed the wall paper not me, just to clarify. He thought I was nuts but in all his years as a painter he said it worked better then the solutions he purchased at home improvement stores. And it was less expensive then those solutions too. Now I cannot take credit for that as I saw it on an episode of an HGTV show years ago. Just making sure to give credit where credit is due.
But...as far as crafting goes, I found another use for FABRIC SOFTENER my friends & here it is:
to clean paint off your paint brushes!
Simply soak your brushes in for 10 minutes and it cleans right off!
It just breaks down the paint fibers attached to the brush fibers so well and BONUS...your brushes smell great. I remembered how well it broke down the fibers of that old wall paper in my home & thought what if it can do the same for my paint brushes? So I tried it and it worked.
Friday, March 22, 2013
Boy oh boy crafters are you in for a treat.
Jenni Bowlin was busy working out this terrific line of beauties.
Check out the 2 videos below of her newly released products :
So clever, cute & charming!
The simple vintage touches offer up a great way to create so much and also mix her items with other lines beautifully.
Hope you enjoyed her collection as much as I did.
Have a wonderful weekend.
Tuesday, March 19, 2013
As if there aren't enough tools out there right?
But this Letterpress & Die Cutting machine has had some overhaul done to it which makes it better then its' predecessor, the Epic Letterpress machine.
Check it out:
So many tools...so little time!
Tune in next week for another newbie for 2013!
Thanks for stopping by.
Monday, March 18, 2013
Yes, I know...curious title right?
I do try to get your attention, can't blame a girl for trying.
This one is all about using your "laundry detergent caps as cups".
You know the ones, they look like this: (But not the ones with the spout in the center)
I simply use them as vessels for mixing paint or pouring in inks, gesso, gel medium, etc...I think you get the idea. They have a small footprint making it easy to set it aside on my work space & it will stay in place. I also appreciate the high wall giving you plenty of space to fill the cap as you would a cup.
You can pour your medium of choice in gradually & in increments. I always like to start with a little & add more as I need to. It saves from waste and has helped me avoid spills. My smaller / shorter paint brushes and foam brushes fit inside well and can actually stand in the caps too.
It's yet another way to craft-cycle everyday items around the house that you would otherwise discard.
P.S. Is it crazy that as I was finishing the post I thought of another tip for these?
I'll share it just in case you're wondering- even though I have not tried it myself. What if...
You took a bunch of these and lined the inside of a kitchen or cabinet drawer from end to end and used them to store stuff? ( I suppose you could adhere them/connect them with a strong adhesive like E6000).
You know...like brads, clips, buttons (oh...using the coordinating color of cap to indicate the color of whatever button is inside)...the hamster wheel in my head is spinning!
I am sure you can think of more ways to put these functional caps new life in your craft space or around the house by recycling.
Thanks for tuning in.
Sunday, March 17, 2013
Hello Crafty Friends!
I wanted to post some pics of these metal chalkboards I made for my daughter's upcoming wedding reception.
I also embellished the little magnetic erasers that you see on the chalkboard. My daughter plans on having these at the photo booth for guests to write them wedding messages & pose with in the photo booth. I thought it was a great idea! As always, I am happy to oblige.
I have been making things for her shower too but can't show those as her shower is next week. That reminds me, I should be taking pics of those before I take them to the shower that way I can share them with you!
Hope to be crafting more & sharing them here with you all real soon.
Thanks for tuning in.
Have a terrific week ahead!
Friday, March 15, 2013
Really, need I say more?
Check out the video below as the King of Crafts shows us all about it:
Oh...isn't he...oops...aren't the paints dreamy?
Those colors are so rich and love how you can use them on all kinds of surfaces. And once they dry they are waterproof.
Gotta love it!
Tuesday, March 12, 2013
Yes, I am sharing Tim Holtz latest Alterations Die Cuts by Sizzix that he debuted at Winter CHA 2013 by way of the awesome Noell Hyman of Paperclipping.com.
These fantastic die cuts are so innovative and dynamic. They are most definitely useful tools for any crafter's arsenal.
Check out her video below:
Aren't these wonderful?
That picture wheel is to "die" for!!!!
How in the world will we ever afford all this stuff?
I am well aware that it is easy to love & covet all of Tim Holtz's goodies, I think I need a part time job just for craft goodies!
Oh well, no harm in looking right? Just add to your wish list on the Tim Holtz App, drop hints to your loved ones and maybe some of these lovelies will magically appear.
Hope you enjoyed.
C-ya back here next time-thanks for coming!
Monday, March 11, 2013
...yes, paper piercing perfection crafters. It's over-rated the art of piercing right? Well, not really but sometimes getting it right can be as much of pain as stabbing your finger with the piercing tool.
For today's tip I hope to take the stigma out of it for you so you can reach paper piercing perfection in 2 easy steps.
1- USE FOAM AS YOUR BASE UNDER YOUR PIERCING MEDIUM. Whether it's paper, plastic, fabric, vinyl the FOAM will be of great help.
The foam provides a great barrier between your fingers and of course your actual crafting surface. You should still use a cutting mat but you will get one with a lot less scratches, raised bumps or tiny holes from your piercer. It also allows for steady, controlled insertion & removal of your piercing tool for more even and uniformed stitched holes.
You can purchase inexpensive fun foam you can find at arts & crafts stores, Walmarts and/or Targets and keep it on hand.
2-GRAB A HOLD OF ONE OF THESE:
THEY ARE PLASTIC NEEDLEPOINT CANVAS MESH. These will help give you even, straight & perfectly aligned piercing holes every time. Any of these will work for random piercing. If you are looking to pierce those shapes specific to the canvas mesh, they will be of greater assistance then.
Best thing is you can pierce that same shape in many sizes by simple selection. You can use a pencil, pen or marker in place of the piercer first to draft your shape. The closer to the center of the canvas mesh you are the smaller your shape will be. You can remove the mesh, review the "draft" then if you are happy with it-proceed to piercing. ( OR...leave as is)
You must use the PLASTIC MESH. It provides a little more stability & rigidity than the other ones on market. I believe there are ones of varying materials like raw canvas, burlap & materials.
The plastic ones are lightweight but have more stability within each of its' tiny "walls". Not to mention they are easy to store & work with as well.
These can be found in craft stores like Joann's, Michael's, A.C. Moore & Hobby Lobby but I am not sure about Walmart & Target. I know they have them online as well at Consumer Crafts.
Both the foam & the canvas mesh are relatively inexpensive averaging from .29 cents & up (U.S.) for one sheet of foam to .59 cents & up (U.S.) for the canvas mesh. Pricing varies depending on retailer & size you select of the product.
Personally, I think they are a relatively inexpensive solution to sometimes pesky problems with piercing. Two well known ones being the proverbial accidental pricking of the finger and misalignment.
If you are plagued with the same piercing dilemmas give this tip a try.
*Painless Paper Piercing Recipe*
3-Plastic Canvas Mesh
Until next time,
Friday, March 8, 2013
Happy Friday All!
Today's find is brought to you by Webster's Pages & it's their Modern Romance Collection.
Check out all the goodies:
Isn't this collection divine?
I simply adore Webster's Pages. I love how this line covers everything. It is versatile enough to use for all occasions. I also appreciate how they offer "quick picks" for $1.
What do you think? Have you had a chance to see this collection newly released during Winter CHA 2013?
Glad you stopped by today and hope you enjoyed the little sneak peek.
Have a wonderful weekend!
Tuesday, March 5, 2013
Yes crafty friends, you read that right!
It's E6000 spray adhesive. If you already use & love the E6000 gel adhesive tube you know how truly strong and reliable it is. And so when I saw in my research that the fantastic folks of E6000 were offering it in a spray medium I just flipped.
Adhesive for us crafters is such an important thing that I view it as a tool so that is why I decided to feature it as this week's tool.
This new version of E6000 adhesive has no odor, the same strong adhesion factor & the ability to be cleaned up with water. It works on paper, plastic, wood, foam and many other materials.
Check out the video shared by Craft Test Dummies:
E6000 spray adhesive is going to be released for retail purchase really soon and will start at $8.99 USD retail price & up for 8 ounces depending on the retailer and region.
I already use the gel but can see myself using this amazing method of adhesive delivery as well.
How about you?
Monday, March 4, 2013
You & me baby we're stuck like glue... or maybe not us so much but your ink spray nozzles.
Has this ever happened to you crafters?
Where you go to spray or spritz your Glimmer Mists, Lindy Stamp Gang Fabios or Perfect Pearls sprays and the atomizers are "STUCK". They won't function for ya. Nothing's spraying out of the nozzle. The whole is covered in goop or something is blocking it from releasing your color sprays.
That's usually an indication that there is caked on ink residue that is blocking the atomizer from actually performing its' function. It's gummed up and not allowing the ink to make its' way out of the hole & onto your project.
So what do you do?
Today's tip is what I do.
- unscrew the caps
- throw them into BOILING water! When the water is boiling remove from your stove top or the microwave then throw your caps in
- let them sit in the boiling water for approximately 5 minutes or until the water cools to the touch allowing the caps to soak
-tap off any excess water & squeeze the pump several times to get the atomizer function going again as if you were spritzing your project with ink
-use a paper towel or dish cloth to scrub off any visible residue from the nozzle & cap
The hot, BOILING water actually helps break down the residue and releases the gunk from the atomizer completely, clearing way for your inks to spray out as they should.
This works for me & I find that I don't have to use any expensive cleaners to get the job done. Also, it salvages my spray inks and keeps my atomizers in functioning order.
Let me know if you try it & how it works for you.
I appreciate your visit & hope you were able to glean something helpful.
Friday, March 1, 2013
Today's find is the Graphic 45 F'rench Country Collection which was newly released at winter CHA 2013.
Look at how pretty the line is below:
Hope you enjoyed this week's find of fabulosity!
Have a wonderful weekend.